Quote Originally Posted by amtrosie View Post
BC hose comes off the R/H post, over the L/H shoulder and attached to the inflator hose. Bungee this to the left shoulder strap so it does'nt float around.
Why right post for the primary inflator hose? The GUE web site states the chance of roll off/valve breakage, leading to loss of backup reg and primary bouyancy...

Roll off/valve break in a cave or tight overhead environment perhaps, but what's the chance of this in open ocean?
Hose routed from right over left puts a nasty bend and therefore stress on the lpi hose, increasing the chance of failure
If the right post was to fail, you'd have to do a shut down, swap to backup and sort out your bouyancy... quite a bit to deal with

If the hose was attached to the left post

Hose routing is straighter/neater, less stress on the hose.
If roll off/valve breakage was to occur, you'd have a chance of finding out as and when you tried to inflate your wing and nothing happened (or when the pressure reading stayed the same), as opposed to waiting until you have a right post failure, and an attempt to breath off your non functioning back up reg.
Right hand post failure, just shut down and swap to backup, bouyancy would still be OK.

I can vauguely see why the roll off/valve break could be concern, but even then the logical way seems to be left post primary inflator. Can you expand any?