Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: O-rings

  1. #1
    Master of Mask Mold seasnake's Avatar
    City
    Sydney
    State
    Nova Scotia
    Country
    Canada
    Join Date
    Jan 2007
    Posts
    651

    Default O-rings

    What's everyone prefer for o-rings? Do I understand correctly that EPDM would be the superior material for o-rings in scuba applications?

    Ron

  2. #2
    Registered Users
    Join Date
    Oct 2007
    Posts
    3

    Default

    epdm has always worked for me

  3. #3
    Registered Users Sarah's Avatar
    Join Date
    Jan 2007
    Posts
    1,398

    Default

    I prefer fluoropolymer elastomers such as Viton.


  4. #4
    Photo & Videographer Papa Bear's Avatar
    City
    Beaumont
    State
    Kalifornia
    Country
    USSA
    Join Date
    Aug 2007
    Posts
    1,406

    Default

    I prefer White Gold for my rings!
    May all your dreams be wet ones! Visit us at Twotankedproductions.com
    Reed's Rod dive Tool Please help save the worlds Coral reefs! http://safemooringfoundation.org/

  5. #5
    Cave Diver BamaCaveDiver's Avatar
    City
    Burlington
    State
    KY
    Country
    USA
    Join Date
    Jan 2007
    Posts
    255

    Default

    The thing to remember is that any oring will burn under the right conditions (same guys who discovered the leaky cylinder that passed hydro got bored one day and put this to the test), so you need to look at what is given off should that happen. Viton is a good choice for oxygen service, but when it burns it does give off some nasty gases. EPDM does not seem to be as bad when it burns.

  6. #6
    Wreck Diving Moderator acelockco's Avatar
    State
    PA/NJ
    Country
    USA
    Join Date
    Jun 2007
    Posts
    2,172

    Default

    I use the el-cheapo o-rings you can get at the local hardware store. They don't last as long as the other o-rings out there, but they are so cheap that you can replace them on every dive and never even think about it. You can get a 100 pack for just a few bucks.

    By the way, they still do last a long while, but I am really careful with my gear.

  7. #7
    Cave Diver amtrosie's Avatar
    City
    formerly So. Florida and missing it!
    State
    Washinton
    Country
    USA
    Join Date
    Jan 2007
    Posts
    300

    Default

    Ah yes, but the right O-ring is always the answer. The last thing I want is a cheap O-ring ruining a good dive. Or better yet, failing at a critical time of the dive, on a critical piece of gear. That old rule of coming up as many times as one goes down comes into jeapordy. If one is willing to scrimp on something as small and cheap as an o-ring, how much more on something more expensive. God forbid, it is a life sustaining piece of gear.......Oh wait,!!! thats what scuba is all about!!

  8. #8
    Wreck Diving Moderator acelockco's Avatar
    State
    PA/NJ
    Country
    USA
    Join Date
    Jun 2007
    Posts
    2,172

    Default

    It has never been a problem for me in the past. It is also something most of my dive buddys do. I have only had one o-ring fail on us the entire summer, and it was operator error that caused the problem. It happened before the dive and of course I had plenty of extra.

    By the way, do you really think the hardware store o-rings are not as good as the ones from the dive shop? My thought is the "standard" o-rings (like the ones from Trident) that you buy at the dive shop are IDENTICAL to the ones from the hardware store. I bet they are most likely made in the same factory, but have different packaging. Of course as soon as the SCUBA name is added, the price goes up.

    Now if you are not using standard o-rings then that is another thing altogether. I still have about 60 dives on the same hardware store o-ring without any problems.

    And don't fool yourself, ALL o-rings will fail, even Papa Bear's White Gold ones. It is really not a big deal because the large majority of the time this happens before the dive and is corrected.

  9. #9
    Cave Diver amtrosie's Avatar
    City
    formerly So. Florida and missing it!
    State
    Washinton
    Country
    USA
    Join Date
    Jan 2007
    Posts
    300

    Default

    Quote Originally Posted by acelockco View Post
    It has never been a problem for me in the past. It is also something most of my dive buddys do. I have only had one o-ring fail on us the entire summer, and it was operator error that caused the problem. It happened before the dive and of course I had plenty of extra.



    I bet they are most likely made in the same factory, but have different packaging. Of course as soon as the SCUBA name is added, the price goes up.




    And don't fool yourself, ALL o-rings will fail, even Papa Bear's White Gold ones. It is really not a big deal because the large majority of the time this happens before the dive and is corrected.

    Your argument is that a majority of the time an o-ring will not fail?

    I refuse to play the odds (call it the cheap Jew in me), or leave something so easily attended to, to chance!! A simple service call will ward off those failures and virtually guarantee a fail safe-dive. Nothing is 100% (except death and taxes), so let's dispense with everything will fail, eventually argument!


    As for the cost esculating when annotated as "For SCUBA use", I have to chuckle. The scuba industry has nothing on the aviation industry when it comes to prices!

  10. #10
    Moderator lottie's Avatar
    City
    Milton Keynes
    Country
    UK
    Join Date
    Jun 2007
    Posts
    901

    Default

    Quote Originally Posted by amtrosie View Post
    Your argument is that a majority of the time an o-ring will not fail?
    This also depends on whether you're an optimist or a pessimist - is the glass half-full or half-empty?

    Quote Originally Posted by amtrosie View Post
    I refuse to play the odds (call it the cheap Jew in me), or leave something so easily attended to, to chance!!
    Wouldn't that be the other way around? The cheaper the better - keep all the money in the pot and count it each night? (i'm thinking scrooge)
    So does that mean you have a big nose???

    I'm off to eat some latkes...(2 months early!! )
    Lottie

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •