What have you built?

[amtrosie]

I have found Snap-on tools to have excellent spanner wrenches, also their other tools more than stand up to test. They have a line of wrenches called "Flank drive plus" that are GREAT for removing items that have rounded off flats. This is from divers trying to do their own stuff with THE WRONG TOOLS!!! (a pet peeve of mine, from my dive shop days) Their sockets are also very good.

[randeleden]

Hi
I build a video housing out of PVC pipe. The controls are manipulated with magnets from the outside and I have a 3,5" LCD screen in the back. Unfortunately I forgot to switch it of after a dive and fried the LCD. Now I have installed a laptop fan to keep everything nice and cool inside.

Regards

[The Publisher]

Hey Randel! Good to see you here!

[acelockco]

Hi
I build a video housing out of PVC pipe. The controls are manipulated with magnets from the outside and I have a 3,5" LCD screen in the back. Unfortunately I forgot to switch it of after a dive and fried the LCD. Now I have installed a laptop fan to keep everything nice and cool inside.

Regards

LETS SEE SOME PHOTOS AND A HOW TO!!!!


Welcome to our place, glad to have you here.

[mssusan00]

I’ve built bookcases for family.

[Papa Bear]

That is something useful and if you do a lot of diving you might come up with DIT for your diving!

[Annabelle2003]

You guys are so handy! I wish my husband could do something himself!

[Papa Bear]

Beach Diving float from and old, or new, inner-tube, a Diver down flag, 100ft of light poly line, zip ties, rubber band(From Tubes), and a game bag in the middle to put "Stuff" in! Cheap and simple! You can use a reel or a simple Dumb bell shaped piece of stainless wire to wind your line around and a brass clip to clip to your BCD. Tow it while shore diving or clip it to Kelp or Bottom anchor. Then Do your dive and ride it back to shore!

[padipro]

Pictures...All are home made from PVC. If you're interested in information on how I made them let me know. I used to have a website but MSN shut all these sites down.

This is the latest one I made. Worked great for about 2 years until my buddy took it to 190 FSW where it finally flooded.


I made this one for a friend.


This is one of the original housings I made along with a lighting system I made.

[acelockco]

Pictures...All are home made from PVC. If you're interested in information on how I made them let me know. I used to have a website but MSN shut all these sites down.

I definitely need to know more, these look awesome!!