Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Aladin tec failure to connect

  1. #1
    Registered Users
    Join Date
    Oct 2007
    Posts
    28

    Default Aladin tec failure to connect

    i have a Aladin Tec dive computer, it was working great and synchronising directly with my laptop and my PDA. tonight i was checking it cause i am going to hurghada tomorrow for diving, it failed to connect to both my PDA and my laptop.
    Please help me out, i donno what happened it was functioning great, and this is the first time it happens, i am so upset.
    If anyone, went thru this before or knows how i can figure out this problem please let me know.
    thanks in advance.

  2. #2
    Registered Users Sarah's Avatar
    Join Date
    Jan 2007
    Posts
    1,398

    Default

    Anyway to reset it?

  3. #3
    Registered Users hbh2oguard's Avatar
    Join Date
    Jan 2007
    Posts
    632

    Default

    Don't get too upset, it could be worse. Hell I don't even bother syncing my computer. As long as the computer works it's not the end of the world. My aladin prime broke and it's been in the shop for a few weeks, back to the tables and I've been fine

  4. #4
    Registered Users
    Join Date
    Oct 2007
    Posts
    28

    Default

    Quote Originally Posted by iDiveChick View Post
    Anyway to reset it?
    Donno if it has something to reset, but defenetly no clear way in the manual, i even tried to remove the battery but nothing happened.

  5. #5
    Registered Users
    Join Date
    Oct 2007
    Posts
    28

    Default

    Quote Originally Posted by hbh2oguard View Post
    Don't get too upset, it could be worse. Hell I don't even bother syncing my computer. As long as the computer works it's not the end of the world. My aladin prime broke and it's been in the shop for a few weeks, back to the tables and I've been fine
    well, thanks anyhow, it seems one should always never fully depend on new tech devices, and it will always be so important to never forget how to use the tables.
    thanks again.

  6. #6
    Registered Users hbh2oguard's Avatar
    Join Date
    Jan 2007
    Posts
    632

    Default

    Fully agree, sometimes new technology doesn't alway work. After my computer turned off twice during a dive, I brought it in. I've been using a old depth gauge and pressure gauge I had and it's worked fine. I don't normally do numerous dives in one day so I haven't missed a computer except for the assent rate.

  7. #7
    Wreck Diving Moderator acelockco's Avatar
    State
    PA/NJ
    Country
    USA
    Join Date
    Jun 2007
    Posts
    2,172

    Default

    Quote Originally Posted by hbh2oguard View Post
    Fully agree, sometimes new technology doesn't alway work. After my computer turned off twice during a dive, I brought it in. I've been using a old depth gauge and pressure gauge I had and it's worked fine. I don't normally do numerous dives in one day so I haven't missed a computer except for the assent rate.

    And of course you know all you have to do is watch your smallest bubble to know that.

  8. #8
    Registered Users hbh2oguard's Avatar
    Join Date
    Jan 2007
    Posts
    632

    Default

    yea that's what I've been do, and also going up as fast as my buddy with a computer(yes I know you shouldn't use another persons computer) because blablabla but I haven't had any problems.

  9. #9
    Wreck Diving Moderator acelockco's Avatar
    State
    PA/NJ
    Country
    USA
    Join Date
    Jun 2007
    Posts
    2,172

    Default

    So with that idea, I guess you will continue to do it unitll you do have a problem? Well what then?

  10. #10
    Registered Users hbh2oguard's Avatar
    Join Date
    Jan 2007
    Posts
    632

    Default

    no not untill I have a problem, untill I get my computer back from the shop.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •