Bama I fully agree that every VIP isn't the same, and it seems like diving down south is a pain in the butt. Hydo's every year, I guess it's safer but must add up and just seems a little overkill.
Printable View
Bama I fully agree that every VIP isn't the same, and it seems like diving down south is a pain in the butt. Hydo's every year, I guess it's safer but must add up and just seems a little overkill.
It does add up i just had 5 of my tanks hydrod. A$100 for all of them and then a fill is on top of that. I was lucky because i found a test station near me but if you go thru a shop its A$40-50 per tank at least including the fill. A$10 saved per tank adds up pretty quick when you have a few and your willing to take them to the test station. Add ontop of all that recleaning the tanks for O2 service and the price is even more. On the good side of things i cant remember the last time a tank went pop. Burst disks help as well.
Matt
welll that's not terrible
Hydro is no substitute for a good visual inspection. Some friends recently proved that when they found three cracks in an AL cylinder that had just come back from hydro (and had passed!) Water will not be pushed through smaller cracks and deficiencies the same way that air will, so a hydro will not find every deficiency. After noting the cracks in that AL cylinder, they got the hydro station to agree to let them test a few sample cylinders to see if this was a true miss or just a rare occurance. Their testing confirmed that a cylinder can pass hydro with neck cracks present. I will see if I can find the pics of that cylinder and post them if you are interested.
It would be neat to see those pics. Makes sense though ... the hydro isn't specifically looking for neck cracks, gouges, rust ... it is just testing the cylinder's ability to expand and bounce back . . .
The hydro test uses water under pressure to measure cylinder expansion. What my friends found out is the water will not pass through some neck cracks as easy as air will. These photos show three neck cracks detected during a VIP on an AL 80 that had just come back from hydro (it passed hydro with flying colors.
http://www.scubamagazine.net/photo/s....php?photo=118
http://www.scubamagazine.net/photo/s....php?photo=119
http://www.scubamagazine.net/photo/s....php?photo=120
http://www.scubamagazine.net/photo/s....php?photo=121
http://http://www.scubamagazine.net/....php?photo=122
that's a little scary, but that's why with every hydro you have to get a VIP
There was a pretty good debate circulating about prior to this incident as whether a VIP was needed in conjunction with a hydro. Many argued that the hydro should suffice if the techs looked for dents and dings. Looks like they were wrong. It is interesting to note that the two guys who found this cylinder (and took the photos) like to experiment, ala the myth busters of the scuba industry.
They're in the ScubaMagazine Gallery!
Thanks Bama, scary cyliner photos!