PDA

View Full Version : Subal Housing for Nikon D300



The Publisher
05-30-2008, 08:14 PM
SUBAL has announced their new ND30 housing for the Nikon D300

The camera is mounted on a saddle for precise positioning inside the housing. Ergonomic placement of all important controls provides convenient and comfortable handling of the camera functions.

A 4 mm main-O-ring and the SUBAL QuickLock latching system make it virtually impossible to close the lid if the O-ring is not lying correctly in its groove. Maximum security is assured. Threaded holes on the base and in the top shoe allows mounting of trays, aiming lights or other accessories. Generous shading of the LCD-monitor provides a bright and clear image.

The housing incorporates an excellent viewfinder optic for full frame viewing. Optionally the housing can be assembled with the new magnifying Viewfinder Optic GS 180. As with all our products choice of materials, machining, surface protection and finish conform with SUBAL’s well known standards of reliability and workmanship.

All SUBAL ports with bayonet mounts are fit this housing.

Controls/Functions:

Power On - Off / Display Illumination
Shutter Release,
Zoom (manual focus)
Front and Rear Main Dial
Lense Release
Mode Dial
Focus Mode Selector (M-S-C), AF - Area Mode Selector, Metering Selector, AF -Lock, Flash Sync Mode / Flash Compensation.
Push Buttons for: Mode, Exposure Compensation, Playback, Delete, Menu, Protect, Thumbnail, Enlarging, OK, ISO, Quality, White Balance, Multi Selector.

Technical data:

Seawater resistant aluminum alloy, machined from block, extreme surface hardening and corrosion resistance through HardCoating. All parts manufactured from anodized and hard coated aluminum, acid proof stainless steel or high quality plastics. Seals are seamless precision O-rings. O-rings in hard coated glands. SUBAL QuickLock latching system.

W x H x D:
Approx. 245 x 180 x 145 mm (w/o port and handles)

Flash connector:2 Flash connectors Optionally Nikonos V, IKELITE or subtronic S6 sockets

Strobe arm mount: Two 25 mm T-plates, TLC- or Ultralight base optional